Showing posts with label 030401. Show all posts
Showing posts with label 030401. Show all posts

Monday, August 26, 2019

Jaguar S-Type (X200) V6-3.0L Technical Service Bulletin # S204-09 Date: 030401

Jaguar S-Type (X200) V6-3.0L Technical Service Bulletin # S204-09 Date: 030401



Tires/Wheels - Vibration/Shimmy



S204-09



S-TYPE



DATE 04/02



Amended 04/03



MODEL



2000 MY-ON



S-TYPE



VIN



L00001-ON



Vibration/Shimmy - Tire Radial Force Variation - Optimizing Wheels And Tires



Remove and destroy Bulletin S204-09, dated 4/02. Replace with this Bulletin.



Revisions are shown with asterisks and black bars.



Issue:



This technical bulletin can assist with resolving customer complaints of vibration/shimmy. Vibration/shimmy can be caused by Radial Force



Variation (RFV) in the wheel/tire assemblies and the position of the affected wheels on the vehicle.



Action:



Note:



Access to a Hunter 9700/9712 wheel-balancing machine is required to perform the steps in this technical bulletin.



In case of a customer complaint of vibration/shimmy on vehicles, follow the optimization procedures below using a Hunter 9700/9712 balancing



machine.



TYPES OF OPTIMIZATION PROCEDURES



Tire to Wheel Match Mounting



Tire is positioned on the wheel so that the 'low point' of the tire is matched to the 'high point' of the wheel. This procedure is also referred to as



'match mounting'.



2000 Jaguar S-Type (X200) V6-3.0L Page 58



The Hunter balancing machine performs this procedure.



Tire/Wheel Assembly to Hub



Tire/wheel assembly is mounted to the vehicle's hub in a manner that allows the Radial Force 'high point' of the assembly to be neutralized by taking



up the inherent clearance in the wheel to hub mating surface (Illustration 1). The Hunter balancing machine identifies high point of the wheel/tire



assembly.



Note:



Tires are *factory match-mounted* on the wheels by Jaguar Cars at point of initial assembly and balancing. It is important to retain this mounting



on vehicles where it is known that the original factory balance is still intact.



WORKSHOP PROCEDURE



Note:



Obtain the S96 Tire Optimization Form and first fill out the "original tire information" section.



1. Bring tires to proper cold air pressures and take the car on a 15-20 mile (highway) road test to ensure that all flat spots are removed and



sufficient tire heating has taken place. *Tire heating is extremely vital to the process, it must not be overlooked.*



2. Ensure the vehicle is lifted off the ground as soon it returns, to minimize temporary flat spots.



3. *A) For vehicles with original factory balance intact* - while still warm, remove each wheel. Measure Radial Force variation, do not disturb



factory wheel weights. Proceed to step 4.



*B) For vehicles with non-factory balance or with a new tire being mounted* - while still warm, remove each wheel. Balance the wheel on the



Hunter 9700/9712 and measure the Radial Force variation. Perform wheel to tire match mounting here if balancing machine indicates



necessity.



4. Record the value of the Radial Force variation (lbs.) on the inside of each tire with crayon, and mark 'high point' spot (as indicated by Hunter



9700/9712) on the tire with a hash mark on the sidewall. It is recommended that a permanent paint mark be applied on the inside sidewall as



2000 Jaguar S-Type (X200) V6-3.0L Page 59



well. This will eliminate the need to identify the "high" spot again if a future repair requires removing the wheel. The Tire Optimization Form



(S 96) must be completed and attached to the hard copy of the repair order along with the Radial Force Variation print outs from the tire



balancer.



Note:



On vehicles with directional tires or different size front and rear tires, the wheel and tire assemblies can only be optimized at their original



location on the vehicle. Proceed to step 6.



5. Reinstall wheels as follows:



^ lowest value of Radial Force variation on left front of vehicle,



^ second lowest value of Radial Force variation on right front of vehicle,



^ third lowest value of Radial Force variation on left rear of vehicle, and



^ greatest value of Radial Force variation on right rear of vehicle.



However, do not fully tighten wheel nuts. Snug them in by hand to the point where there is no play or wobble between the road wheel and



mounting surface.



6. Rotate each wheel so that the previously marked high point is at the bottom (6 o'clock position) and will contact the floor when the vehicle is



lowered (for rear wheels, have transmission in neutral and have an assistant hold one wheel stationary while the other is rotated to bring the



high point to the 6 o'clock position).



7. Lower the car partially to the floor, so that light to moderate load is placed on each of the wheels.



8. *Torque the lug nuts of each wheel to 125 Nm (92.5 lb. ft.).*



9. Road test the vehicle.



MOUNTING EQUIPMENT FOR ALL WHEEL BALANCERS



For optimum results, Jaguar Cars requires that tire/wheel assemblies are mounted to the Hunter 9700/9712 using the rear cone and flange plate



adaptor method (Illustration 2). The 5-lug flange plate adapter (part no. 175-264-1) can be ordered from Rotunda 1-800-ROTUNDA (768-8632).



This flange plate must be used in conjunction with the proper rear mounting cone. This mounting method provides precise balance with the highest



rate of repeatability.



TWO PIECE, CLIP-ON WHEEL WEIGHT INSTALLATION PROCEDURE



2000 Jaguar S-Type (X200) V6-3.0L Page 60



For rim mounted wheel weights, use only Jaguar specification two piece clip-on wheel weights (Illustration 3). Jaguar Cars recommends the use of a



compression tool to install wheel weights. This tool *(available through SPX-OTC)* prevents accidental damage to the rim and deformation of the



wheel weight clips.



1. *Compress the inflated tire at the bead, and the shoulder with compression tool HAW 900 (available through SPX-OTC) (Illustration 4).*



Note:



Inner edge of compression tool must be placed close to rim. Outer swivel foot of compression tool must be placed onto shoulder of tire.



2. Insert the wheel weight clip between the tire bead and the road wheel as shown in Illustration 5. Release the compression tool.



2000 Jaguar S-Type (X200) V6-3.0L Page 61



3. *Spread the wheel weight clip using the two piece clip tool HAW 900-1 (available through SPX-OTC). Slide the weight under the clip. Ensure



that the weight is fully seated.*



4. Recheck balance.



Special Tools



Parts Information



Warranty Information



WARRANTY POLICY STATEMENT



Jaguar Cars will pay for the replacement of a tire(s) for a steering vibration/shimmy complaint on a vehicle with less than 6 months, or 6,000 miles,



whichever occurs first, provided the following conditions are met:



^ The retailer has demonstrated consistent compliance in maintaining 60 PSI storage pressure on all new vehicles in inventory up to time of sale.



Failure to demonstrate compliance with this requirement will exclude the retailer from eligibility for tire reimbursement under this policy



^ The diagnostic procedures outlined in this bulletin were followed using the required equipment, but the concern could not be resolved.



^ A Tire Optimization Form, S96, must be completed and attached to the hard copy of the repair order along with the RFV print outs from the tire



balancer.



^ Replacement of the tire was authorized by your After Sales Market Manager prior to the work being completed. A signed W22 Authorization



Request Form must be attached to the hard copy of the RO and stored in the vehicle file.



^ The replacement tire(s) was purchased through Jaguar Tire Program.



^ Displaced tires must be retained for inspection and scrapping by your After Sales Market Manager.

Sunday, January 20, 2019

Jaguar F-Type Coupe To interrupt Cover In Los Angeles And Tokyo

Nothing else on the road even appears to be like like it’s in the same zip code because the P1, and the arcing headlights it uses are the last thing any sports car driver desires to see in their rear view. Ok, so an idea automotive can take some liberties, but for crying out loud, the etching on this thing’s headlights seems to be like it belongs on Don Draper’s most interesting whiskey set! Yes, there are people on the market who feel the 4C’s preliminary headlight design was unattractive. It’s solely fitting that the man who spearheaded this prestigious acquisition is pushed in among the finest promoting Land Rovers, in this case the Freelander SUV. It’s difficult for know-how to stay as much as what has been referred to as “the window to the soul,” but some of the perfect examples are from the world of supercars. EVO Magazine has tradition of choosing one of the best driver’s automobile, a automotive that gives “the thrill of driving” from a large group of sizzling hatchbacks, sportscars and even supercars.


One of the numerous particulars that make this automobile a piece of rolling sculpture is its laser headlights, directly understated but highly effective and assertive. That final one will not be everyone’s first choice, but it will definitely make your Phantom unforgettable. This degree of performance is on par with the dearer Porsche 911 Carrera S we last tested. Last year’s winner- Porsche 911 GT3 was also at hand to attempt to defend the crown. Finally, the crown had to presented to the Ferrari 458 Speciale. Not one, but two Ferrari LaFerraris made it to the occasion, one in all which was Jay Kay’s distinctive kermit green automobile. Read extra about Sachin’s automobile assortment right here. A range-topping 550 PS R-S observe monster is also on the playing cards, as spied here earlier than. So, the contenders for this year’s title included every little thing from the super quick and monitor centered to the practical but blisteringly fast.


This car too is without doubt one of the highlights of this year’s GFOS. A unanimous choice after all the highway testers had pushed the automobile and had been simply blown away by the precision, dealing with, efficiency and suggestions from the Speciale. Porsche 911: Because the archetypal sports automotive that has developed over the decades, the 911 expertly balances consolation and performance. Leather seats are standard—another distinction from the RC F—but the take a look at automobile included 8-way-adjustable sport seats with Alcantara inserts and an Alcantara headliner, one other Performance Package merchandise. The LC 500 is as much about luxury as it's about performance. The Tata Motors owned British luxury marquee sold over one thousand units during this interval, riding excessive as a result of extremely excessive demand for gross sales of its just lately launched new models reminiscent of All-New Jaguar XE and Discovery Sport. And the all-in, high-trim SVR model lays on luxurious appointments corresponding to quilted leather-based seats, a heated steering wheel and a suedecloth headliner. The Tesla Model X led the pack by way of energy because the vehicle which participated within the drag race was the P100D performance model.


Models with computerized gearbox or high efficiency V6 engines are pricier. As far as sports activities cars are involved, the Jaguar F-Type R offers the perfect sensation- both visible and aural. • Jaguar F-Type Gr. The upcoming Mazda RX-9 is touted to be the subsequent great sports car from Mazda and can rival the likes of the Mercedes-AMG GT, Jaguar F-Type and the likes. While its competitors are good, much better than the F-Type in some areas, none packs the same sort of visceral thrill, even at a glance from a distance. 2.Forty five crore while the convertible version carries a value tag of Rs. The tribute rally automobiles weren't built from scratch as Jag used as foundation the F-Type Convertible taking inspiration from the Chequered Flag Limited Edition outfitted with a turbocharged 2.0-liter gasoline engine developing 296 horsepower. “a prime market” for the F-Type, which can launch as a gentle-high convertible. The automobile is equipped with an ignition disable gadget that can stop the engine from beginning if the proper unique producer key just isn't used.