Jaguar S-Type (X200) V6-3.0L Technical Service Bulletin # JTB00106 Date: 080605
Keyless Entry - Can't Lock Vehicle Using Remote Fob
NUMBER: JTB00106
(ISSUE 1)
MODEL:
S-TYPE
X-TYPE
XJ
XK
DATE: 5 JUNE 2008
SECTION: 501
Unable to Lock Vehicle With Remote Key Fob - Repair Procedure
2000 Jaguar S-Type (X200) V6-3.0L Page 355
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
Situation:
An issue has been identified where the vehicle will not lock while using the remote key fob but does lock while using the key. Certain models may
emit an audible or visual warning to identify the vehicle has not been locked. This condition may be caused by the shutter in the ignition barrel
becoming 'stuck'.
Action:
In the event of a customer concern of the above, follow the Repair Procedure outlined below to modify the ignition key insert switch.
PARTS:
No parts necessary
TOOLS:
Refer to Workshop Manual (GTR) for special tools (if required)
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
VERIFY LOCKING SYSTEM OPERATION
1. Verify operation of vehicle locking system.
2. Verify operation of all doors, hoods, and luggage compartment latches.
MODIFY IGNITION KEY INSERT SWITCH
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:
2000 Jaguar S-Type (X200) V6-3.0L Page 356
GTR Home > NAS > Model > Service Information > Model Year > Workshop Manual > 2: Chassis > 211: Steering System
1. Refer to Workshop Manual (GTR) section 211: Steering System to remove the ignition lock cylinder.
2. Release the ignition barrel from the housing by:
^ Insert ignition key into barrel.
^ Rotate key to position I.
^ Push in the pin.
^ Gently pull the ignition barrel from the housing.
3. Remove key from ignition barrel.
4. Release the bulking tumbler by (Figure 2):
^ Using suitable needle-nose pliers, lever the small locking pin 'out'.
^ Slide out ignition barrel from lock cylinder.
5. Remove lock pack from ignition barrel to gain access to lock pack and bulking tumbler.
6. Swivel and remove the bulking tumbler from the lock pack. (Figure 3)
7. Examine the arrowed area of the bulking tumbler for burrs or sharp edges. (Figure 3)
CAUTION:
Do not remove excess material.
8. Using emery cloth or a file, gently remove any burrs or sharp edges, being careful to not remove excess material. (Figure 3).
REASSEMBLE IGNITION BARREL
CAUTION
WHEN FITTING THE BULKING TUMBLER ENSURE IT IS FACING UPWARDS AND SLIDES FREELY. USING GREASE
KSP205 FROM THE SQUEAKS AND RATTLE KIT (JLM21204) GREASE LOCK CYLINDER.
2000 Jaguar S-Type (X200) V6-3.0L Page 357
1. Ensure the roll pin is in its normal position. (Figure 4)
2. Assemble the lock pack.
2000 Jaguar S-Type (X200) V6-3.0L Page 358
3. Insert ignition barrel into the lock cylinder. (Figure 5)
4. Using suitable needle-nose pliers, install the pin. (Figure 5)
5. Insert key into lock cylinder and turn to position I. (Figure 5)
6. Slide lock cylinder into the ignition barrel, pressing the locking pin flush with the outer face of the barrel.
7. Verify smooth operation of lock cylinder by:
^ Applying finger pressure to the switch drive.
^ Rotating ignition key through all positions.
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home > NAS > Model > Service Information > Model Year > Workshop Manual > 2: Chassis > 211: Steering System
8. Refer to Workshop Manual (GTR) section 211: Steering System to install the ignition lock cylinder into the ignition lock cylinder housing.
2000 Jaguar S-Type (X200) V6-3.0L Page 359
In dry conditions, the AWD system sends all the facility to the rear wheels and during low traction situations, the system sends 50% of the facility to the entrance wheels in 165 milliseconds. Jaguar’s Vehicle Program Director for Sports Cars Russ Varney explains: “What we require of our AWD system in the F-Type is perfect traction in all weather situations, but preserving rear-drive feel with none corruption. Yes, it will not be as sharp to drive as a Boxster or have the all weather pace of a TT RS, nevertheless it does have a 5.5-litre V8. The F-Type is attractive, however it doesn’t have the jaw-dropping beauty of an E-Type. Temperature is adjusted with a vertical, contact-delicate slide switch, with mode and fan speed set through repetitive-step pushbuttons - none of that are as quick or simple to make use of as good ‘ol knobs. 41,985. Additional trim ranges accompanying the F-Pace and the F-Pace S are Premium, Prestige, R-Sport, and First Edition.
Added in that mannequin are adaptive variable suspension and rear-wheel steering (each geared toward improved handling), together with unique inside and exterior trim. The purchaser can even select between three trim finishes. “Flaxen” is certainly one of three two-tone interior color choices; one also can get all black. The models on this list try to address a few of those query marks in thrilling new methods, and one factor is for certain: Some of the new models introduced next yr will be pretty awesome. Yet when the IS sedan was redesigned for 2014, the IS C didn’t observe go well with, as a substitute sticking with the outdated design for another year. The RC 350 (proven) and extra highly effective RC F are distinquished in look by completely different grille therapies and various scoops. There are four inside hues offered (all with a black dashboard), with F Sport fashions accessible in distinctive pink. The trio of engines are backed by the sleek-shifting, ZF-sourced eight speed computerized transmission, which sends energy to all four wheels.