Jaguar S-Type #S307-20 Date: 050801
A/T - Cannot Select Gears With Shifter
S-TYPE
S307-20
DATE: 08-05
MODEL:
2003-05 MY
S-TYPE
Page 58
VIN:
M45255-N52047
Inability to Shift Gears - Selector Lever Moves Freely Through J-Gate - Repair Procedure
Issue:
Some S-TYPE vehicles, within the above VIN range, may experience a condition where the selector lever can move, but the transmission will not
shift out of gear. Depending on the gear selected at the time of failure, the engine may not start.
Cause:
Selector lever cable bracket retaining bolts loose/adrift.
Action:
Should a customer express concern, follow the Service Instruction outlined below.
1. Raise vehicle on lift.
2. Remove the selector cable bracket retaining bolts (Illustration 1).
3. Clean retaining bolts threads and apply Loctite 243.
4. Install and tighten the selector cable bracket retaining bolts to 8 Nm (Illustration 2).
Note:
Ensure the selector lever position corresponds to the illuminated gear indication light on the J-Gate. Any faults other than the selector
cable bracket retaining bolts - Service fix, are to be carried out as a separate Warranty Claim.
5. Lower vehicle.
Global Technical Reference (GTR) Workshop Manual Information:
Page 59
Internet access: http://www.jaguartechinfo.com
Parts Information
Warranty Information:
Warranty claims should be submitted quoting the information found in the table.
This will result in payment of the stated time and, where applicable parts/miscellaneous expense codes as listed.
Disclaimer
A/T - Cannot Select Gears With Shifter
S-TYPE
S307-20
DATE: 08-05
MODEL:
2003-05 MY
S-TYPE
Page 58
VIN:
M45255-N52047
Inability to Shift Gears - Selector Lever Moves Freely Through J-Gate - Repair Procedure
Issue:
Some S-TYPE vehicles, within the above VIN range, may experience a condition where the selector lever can move, but the transmission will not
shift out of gear. Depending on the gear selected at the time of failure, the engine may not start.
Cause:
Selector lever cable bracket retaining bolts loose/adrift.
Action:
Should a customer express concern, follow the Service Instruction outlined below.
1. Raise vehicle on lift.
2. Remove the selector cable bracket retaining bolts (Illustration 1).
3. Clean retaining bolts threads and apply Loctite 243.
4. Install and tighten the selector cable bracket retaining bolts to 8 Nm (Illustration 2).
Note:
Ensure the selector lever position corresponds to the illuminated gear indication light on the J-Gate. Any faults other than the selector
cable bracket retaining bolts - Service fix, are to be carried out as a separate Warranty Claim.
5. Lower vehicle.
Global Technical Reference (GTR) Workshop Manual Information:
Page 59
Internet access: http://www.jaguartechinfo.com
Parts Information
Warranty Information:
Warranty claims should be submitted quoting the information found in the table.
This will result in payment of the stated time and, where applicable parts/miscellaneous expense codes as listed.
Disclaimer