DisclaimerJaguar XJ (X351) V8-5.0L SC Technical Service Bulletin # K062 Date: 101013

DisclaimerJaguar XJ (X351) V8-5.0L SC Technical Service Bulletin # K062 Date: 101013

Campaign - Rear Antenna Pod Cover Loose/Comes Off

No: K062

Issue: 1

Date: 13 OCT 2010

THIS SERVICE ACTION SUPERSEDES UPS1710-01b.

IT IS VALID FOR A LIMITED TIME ONLY AND WILL EXPIRE ON 31 OCTOBER 2012.

SECTION: 41

Service Action: Rear Antenna Pod Cover

AFFECTED VEHICLE RANGE:

CONDITION SUMMARY:

Situation:

A limited number of XJ vehicles may experience an issue with the retention of the rear antenna pod cover, located inside the vehicle near the rear

windscreen. The pod cover may become detached, fall onto the rear parcel shelf, and expose the antenna circuit board.

Action:

Dealers are required to HOLD the affected vehicles within your control and refrain from releasing the vehicles for onward distribution and sale

pending completion of the rework action detailed below. For cars in Dealer inventory, this Service Action should be performed in conjunction with

70

the vehicle Pre-Delivery Inspection (PDI). For those vehicles already with customers, please perform the repair at the first available opportunity.

PARTS:

TOOLS:

Refer to Workshop Manual for any required special tools

WARRANTY:

NOTE:

Always check DDW to verify that the vehicle is affected by this Service Action prior to undertaking any repairs, as some vehicles have been

updated prior to dispatch. Repair procedures are under constant review, and therefore times and prices are subject to change; those quoted here

must be taken as guidance only. Always refer to DDW to obtain the latest repair time.

Warranty claims should be submitted quoting the Program Code K062, along with the relevant Option Code. The Option Codes which contain

drive in / drive out and may only be claimed if the vehicle is brought back into the workshop for this action alone to be undertaken.

This Service Action is valid for a limited time only and will expire 31 October 2012. All Warranty claims prior to this date must be submitted for

payment within 30 days of completion of the repair.

Normal Warranty policies and procedures apply.

REPAIR PROCEDURE

REPLACE REAR ANTENNA POD COVER

1. Refer to Workshop Manual, section 415-01: Information and Entertainment System > Removal and Installation > Information and Entertainment

System Antenna Base, and replace the antenna cover only.

DisclaimerJaguar XJ (X351) V8-5.0L SC Technical Service Bulletin # JTB00210 Date: 101013

DisclaimerJaguar XJ (X351) V8-5.0L SC Technical Service Bulletin # JTB00210 Date: 101013

Body - Water Leaks At The D-Pillar

No: JTB00210

Issue: 1

Date: 13 OCT 2010

SECTION: 501

Water Ingress via the 'D' Pillar

AFFECTED VEHICLE RANGE:

66

CONDITION SUMMARY:

Situation:

Water leaking into the luggage compartment may lead to water getting into the Audio Unit Amplifier, causing the amplifier to malfunction. This

water ingress may be caused by the area at the bottom of the 'D' pillar allowing water to get into the body seam and transfer to the luggage

compartment. In some cases, this area requires extra sealing.

Action:

In the event of a customer concern of the above, refer to the Repair Procedure outlined below to seal the body seam.

PARTS:

No parts information

TOOLS:

Refer to Workshop Manual for any required special tools

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.

Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

Normal Warranty policies and procedures apply.

REPAIR PROCEDURE

SEAL LUGGAGE COMPARTMENT SEAM

1. Refer to Workshop Manual section 501-11: Glass, Frames, and Mechanisms > Removal and Installation > Rear Quarter Window Glass, and

remove the left-hand (LH) exterior D pillar. (Figure 1)

67

2. Remove the LH side luggage compartment aperture seal. (Figure 2)

3. Remove the LH luggage compartment hinge finishers. (Figure 3)

4. Remove the LH rubber seal.

CAUTION:

Use care to avoid damage to the paint work or vehicle body panels.

5. Using a suitable tool, push the original sealer into the aperture. (Figure 5)

68

NOTE:

Ensure the area is completely dry and free from dirt.

6. Clean the area to be sealed with a suitable cloth.

7. Using a suitable adhesive tape, protect the LH side of the rear window screen seal in the area of the repair. (Figure 6)

8. Using a suitable PU sealer, seal the area, ensuring the sealer fills the gap completely. (Figures 7, 8)

NOTE:

Do not remove too much sealer from the area or create gaps in the sealing when removing excess sealant.

9. Using a suitable cloth remove excess sealer. (Figure 9)

10. Ensure a smooth finish to the sealer.

69

11. Remove the adhesive tape. (Figure 6)

NOTE:

If there is still evidence of water ingress go back to step 8 and continue the process. If there is no evidence of water ingress continue from

step 14.

12. Water test to verify that the leak has stopped.

13. Refer to Workshop Manual section 501-11: Glass, Frames, and Mechanisms > Removal and Installation > Rear Quaner Window Glass, and

install the exterior D pillar. (Figure 1)

14. Install the luggage compartment hinge finishers.

15. Install the luggage compartment aperture seal.

16. Repeat steps 1 - 16 to the right-hand side.