Jaguar XF (X250) V8-5.0L SC Technical # JTB001682 Date: 120803
Body - Front Door Rattles When Driving Or Closing
JTB00168NAS2
03 AUG 2012
*ISSUE '2' CHANGES ARE HIGHLIGHTED BY ASTERISKS*
SECTION: 501-05
Front Door 'Rattle' When Closing or While Driving
AFFECTED VEHICLE RANGE:
XF (X250)
VIN: R00001 - *S48193*
Model Year: 2009 - *2012*
CONDITION SUMMARY:
Situation: A rattle from the lower front door area may be heard when closing a front door or while driving.
Cause: This rattle may be caused by the window regulator cables contacting the speaker assembly and, in certain cases, the anti-rattle foam has
degraded on the cables.
Action: In the event of a customer concern of the above, refer to the Repair Procedure outlined below to rework the window regulator cable.
PARTS:
No parts necessary; information only
TOOLS:
Refer to Workshop Manual for any required special tools
WARRANTY:
NOTE: Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.
2010 Jaguar XF (X250) V8-5.0L SC Page 4
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
Normal Warranty policies and procedures apply
REPAIR PROCEDURE
RE-WORK FRONT DOOR WINDOW REGULATOR CABLE
1. Refer to Workshop Manual section 501-05 (steps 1-3 only) and remove the affected front trim panel.
2. Remove the eight (8) bolts and move aside the speaker assembly
3. Locate the window regulator cable and door harness.
NOTE:
Do not over tighten cable tie.
4. Using a locally sourced cable tie, secure the window regulator cable to the door harness.
NOTE: Use care to ensure no damage occurs to either the door harness or regulator cable.
2010 Jaguar XF (X250) V8-5.0L SC Page 5
5. Remove the excess cable tie end.
6. Install the speaker assembly. Install the eight (8) bolts.
7. Refer to Workshop Manual section 501-05 and install the front trim panel.
Disclaimer
Body - Front Door Rattles When Driving Or Closing
JTB00168NAS2
03 AUG 2012
*ISSUE '2' CHANGES ARE HIGHLIGHTED BY ASTERISKS*
SECTION: 501-05
Front Door 'Rattle' When Closing or While Driving
AFFECTED VEHICLE RANGE:
XF (X250)
VIN: R00001 - *S48193*
Model Year: 2009 - *2012*
CONDITION SUMMARY:
Situation: A rattle from the lower front door area may be heard when closing a front door or while driving.
Cause: This rattle may be caused by the window regulator cables contacting the speaker assembly and, in certain cases, the anti-rattle foam has
degraded on the cables.
Action: In the event of a customer concern of the above, refer to the Repair Procedure outlined below to rework the window regulator cable.
PARTS:
No parts necessary; information only
TOOLS:
Refer to Workshop Manual for any required special tools
WARRANTY:
NOTE: Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.
2010 Jaguar XF (X250) V8-5.0L SC Page 4
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
Normal Warranty policies and procedures apply
REPAIR PROCEDURE
RE-WORK FRONT DOOR WINDOW REGULATOR CABLE
1. Refer to Workshop Manual section 501-05 (steps 1-3 only) and remove the affected front trim panel.
2. Remove the eight (8) bolts and move aside the speaker assembly
3. Locate the window regulator cable and door harness.
NOTE:
Do not over tighten cable tie.
4. Using a locally sourced cable tie, secure the window regulator cable to the door harness.
NOTE: Use care to ensure no damage occurs to either the door harness or regulator cable.
2010 Jaguar XF (X250) V8-5.0L SC Page 5
5. Remove the excess cable tie end.
6. Install the speaker assembly. Install the eight (8) bolts.
7. Refer to Workshop Manual section 501-05 and install the front trim panel.
Disclaimer