Skip to main content

Jaguar XJ (X351) V8-5.0L SC Technical Service Bulletin # JTB00247 Date: 120329 Brakes - Rear Brake Caliper Identification (Information Only) JTB00247NAS1

 Jaguar XJ (X351) V8-5.0L SC Technical Service Bulletin # JTB00247 Date: 120329
Brakes - Rear Brake Caliper Identification (Information Only)
JTB00247NAS1
29 MAR 2012
SECTION: 206
Rear Brake Caliper Identification
2010 Jaguar XJ (X351) V8-5.0L SC   Page 29
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
Situation:
For information only: to ensure correct replacement, the rear brake calipers are identified with a manufacturing code on the caliper.
Action:
In the event it becomes necessary to replace a rear brake caliper, refer to the Inspection Procedure below.
PARTS:
No parts necessary
TOOLS:
No special tools necessary
WARRANTY:
No Warranty information available
INSPECTION PROCEDURE
NOTE:
Please refer to EPC for the correct part numbers required for each vehicle variant.
NOTE:
EPC will display the superseded part numbers.
NOTE:
This bulletin is only for the rear brake calipers and for the vehicles between the specified VINs above.
1. Before ordering or replacing a rear brake caliper, carefully check the vehicle's current rear brake calipers for the presence of a manufacturing
code.
^ If the vehicle's rear brake calipers have no manufacturing code, both rear brake calipers must be replaced.
^ If the vehicle has only one rear brake caliper with a manufacturing code, only the rear brake caliper with no marking needs to be replaced.
2010 Jaguar XJ (X351) V8-5.0L SC   Page 30

Comments

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra