Jaguar XJ (X351) V8-5.0L SC Technical Service Bulletin # JTB00257 Date: 120726 Wheels/Tires - Balancing And Optimization JTB00257NAS1
Jaguar XJ (X351) V8-5.0L SC Technical Service Bulletin # JTB00257 Date: 120726
Wheels/Tires - Balancing And Optimization
JTB00257NAS1
26 JULY 2012
SECTION: 204-04
Tire / Wheel Balancing and Optimization
AFFECTED VEHICLE RANGE:
CONDITION SUMMARY:
Situation:
The steering wheel may exhibit a vibration / shimmy while driving.
Cause: This may be caused by a road wheel / tire assembly imbalance and / or temporary tire flat-spotting.
Action: In the event of a customer concern of the above, refer to the procedure outlined below to balance and optimize the tire / wheel
assemblies and identify tires which may have a temporary flat-spot condition.
PARTS:
2010 Jaguar XJ (X351) V8-5.0L SC Page 22
Wheel weights Locally sourced Qty: as required
TOOLS:
Hunter GSP9700 (or later) Road Force Balancer
NOTE:
To ensure that the road wheel / tire assembly is balanced correctly, Jaguar recommends the use of the Haweka 9700 hub-to-wheel five-fingered
clamp to support the road wheel I tire assembly on the balance machine.
WARRANTY:
NOTE: Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.
NOTE:Factory wheel alignment and wheel balancing are covered for 12 months I 12,500 miles, (20,000 km) whichever occurs first, for OEM
equipment only. Refer to Warranty Policies & Procedures manual for further information.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
Normal Warranty policies and procedures apply
2010 Jaguar XJ (X351) V8-5.0L SC Page 23
2010 Jaguar XJ (X351) V8-5.0L SC Page 24
REPAIR PROCEDURE
Disclaimer
Wheels/Tires - Balancing And Optimization
JTB00257NAS1
26 JULY 2012
SECTION: 204-04
Tire / Wheel Balancing and Optimization
AFFECTED VEHICLE RANGE:
CONDITION SUMMARY:
Situation:
The steering wheel may exhibit a vibration / shimmy while driving.
Cause: This may be caused by a road wheel / tire assembly imbalance and / or temporary tire flat-spotting.
Action: In the event of a customer concern of the above, refer to the procedure outlined below to balance and optimize the tire / wheel
assemblies and identify tires which may have a temporary flat-spot condition.
PARTS:
2010 Jaguar XJ (X351) V8-5.0L SC Page 22
Wheel weights Locally sourced Qty: as required
TOOLS:
Hunter GSP9700 (or later) Road Force Balancer
NOTE:
To ensure that the road wheel / tire assembly is balanced correctly, Jaguar recommends the use of the Haweka 9700 hub-to-wheel five-fingered
clamp to support the road wheel I tire assembly on the balance machine.
WARRANTY:
NOTE: Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.
NOTE:Factory wheel alignment and wheel balancing are covered for 12 months I 12,500 miles, (20,000 km) whichever occurs first, for OEM
equipment only. Refer to Warranty Policies & Procedures manual for further information.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
Normal Warranty policies and procedures apply
2010 Jaguar XJ (X351) V8-5.0L SC Page 23
2010 Jaguar XJ (X351) V8-5.0L SC Page 24
REPAIR PROCEDURE
Disclaimer
Comments
Post a Comment