Skip to main content

Jaguar S-Type #JTB00102 Date: 080522 Engine - Revised Removal Procedure NUMBER: JTB00102

 Jaguar S-Type #JTB00102 Date: 080522
Engine - Revised Removal Procedure
NUMBER: JTB00102
(ISSUE 1)
MODEL: S-TYPE
DATE: 22 MAY 2008
SECTION 303
New Workshop Procedure - Remove / Install Engine Oil Pan
AFFECTED VEHICLE RANGE:
S-TYPE (X200) 3.0L V6 Only VIN: M45255 - N91220
Model Year: 2003 - 2008
CONDITION SUMMARY:
  Page 282
Situation:
The procedure for the removal / installation of the 3.0L V6 engine oil pan has been revised. The old procedure required the removal of the A/C
compressor and alternator. The new procedure requires the A/C compressor and alternator to be tied away from the engine.
Action:
In the event it becomes necessary to remove / install the engine oil pan, follow the revised Repair Procedure outlined below.
PARTS:
No parts necessary
TOOLS:
Refer to Workshop Manual (GTR) for any special tools (if required)
WARRANTY
REPAIR PROCEDURE
REMOVE / INSTALL ENGINE (3.0L V6) OIL PAN
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > X200 - S-TYPE > Service Information > Model
Year Workshop Manual > 3: Powertrain > 303: Engine > 303-01A: Engine - 2.5L / 3.0L
1. Refer to Workshop Manual (GTR) Section 303-01A: Engine - 2.5L / 3.0L (12.60.44) to remove / install the engine oil pan.
Disclaimer
Labels:
Location: Dunning Rd, Arnold, NE 69120, USA

Comments

Post a Comment

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed
Post a Comment
Read more

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra
Post a Comment
Read more