Sunday, November 19, 2017

Jaguar S-Type #S204-S516 Date: 041101 Recall - Spare Tire Speed Restriction Label S204-S516 S-TYPE

Jaguar S-Type #S204-S516 Date: 041101
Recall - Spare Tire Speed Restriction Label
S204-S516
S-TYPE
DATE
11/04
MODEL
2005 MY
S-TYPE
VIN
Refer to VIN list
Spare Tire Speed Restriction Label -
Lack of Adhesion -
Service Action S516
Issue:
A concern has been identified on a number of 2005 MY S-TYPE vehicles that are listed in this bulletin. On vehicles supplied with space saver spare
wheels, poor adhesion of the speed restriction label could result in the label coming loose from the space saver spare wheel.
Jaguar Cars will contact owners of the 2005 MY S-TYPE vehicles, listed in this bulletin, to replace the spare tire label.
A number of vehicles have been repaired at the Port of Entry facility. This Service Action affects vehicles that are outside of the control of the Port
of Entry facilities and any sold vehicles that have not yet been repaired.
Action:
Check the VIN list and DDW to determine validity of the vehicle against the Service Action to ensure that the spare tire label has not already been
replaced at the port, prior to carrying out any repair. DDW will be updated to reflect those vehicles affected by this Service Action.
At the time of confirming a booking for vehicle repair, please ensure that any outstanding Field Service Actions are identified to ensure the correct
parts are available and adequate workshop time is allocated for repairs to be completed at one visit.
WORKSHOP PROCEDURE
1. Open the luggage compartment and install exterior vehicle protection.
2. Reposition the luggage compartment carpet.
3. Remove the tool foam inlay.
Note:
On some vehicle variants it is not necessary to remove the wheel to gain access to the front face of the space saver spare wheel.
4. Remove the tee bolt securing the space saver spare wheel.
5. Remove the space saver spare wheel and place aside.
6. Remove the old speed restriction label from space saver spare wheel.
7. Clean the area of space saver spare wheel before installing the new label.
  Page 53
8. Install the new speed restriction label on the front face of the wheel (Illustration 1).
9. Place the space saver spare wheel in the well.
10. Install and tighten the space saver spare wheel securing bolt.
11. Insert the tool foam inlay.
12. Reposition the luggage compartment floor carpet to the original position.
13. Remove the exterior vehicle protection and close the luggage compartment.
Parts Information:
Warranty Information:
Warranty claims should be submitted quoting program code S516 together with the appropriate option code from the table. This will result in
payment of the stated time and, where applicable, parts/miscellaneous expense codes.
The options that allow for drive in/drive out can only be claimed if the vehicle has been brought in to the workshop for this action alone to be
undertaken.
  Page 54
Service Action S516
NOTE:
Always perform a DDW claim search first to determine whether this service action has been performed on this vehicle. The "Review Claim
History" function will provide a listing of all claims against the vehicle. If this service action number appears in the program code field, do not
perform this service action.
  Page 55
  Page 56
VEHICLES AFFECTED BY THIS SERVICE ACTION
Disclaimer
  Page 57