Skip to main content

Driver/Passenger Seat Module (DSM/PSM)


Driver/Passenger Seat Module (DSM/PSM)
Diagnostic Trouble Code (DTC) Index
Driver/Passenger Seat Module (DSM/PSM)
CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee
confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle
CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number
3548-1358-00
NOTE:
If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the warranty policy and
procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new
module/component
NOTE:
Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of
the 7-digit code listed to identify the fault (the last 2 digits give extra information read by the manufacturer-approved diagnostic system)
NOTE:
When performing voltage or resistance tests, always use a digital multimeter accurate to three decimal places and with a current calibration
certificate. When testing resistance, always take the resistance of the digital multimeter leads into account
NOTE:
Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests
2012 Jaguar XJ (X351) V8-5.0L SC   123
NOTE:
Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
NOTE:
If diagnostic trouble codes are recorded and, after performing the pinpoint tests, a fault is not present, an intermittent concern may be the
cause. Always check for loose connections and corroded terminals
NOTE:
Where an 'on demand self-test' is referred to, this can be accessed via the 'diagnostic trouble code monitor' tab on the manufacturers approved
diagnostic system
The table below lists all diagnostic trouble codes (DTCs) that could be logged in the driver/passenger seat module, for additional diagnosis and
testing information refer to the relevant diagnosis and testing section. For additional information, refer to Seats See: Body and
Frame/Seats/Testing and Inspection
2012 Jaguar XJ (X351) V8-5.0L SC   124
2012 Jaguar XJ (X351) V8-5.0L SC   125
2012 Jaguar XJ (X351) V8-5.0L SC   126
2012 Jaguar XJ (X351) V8-5.0L SC   127
2012 Jaguar XJ (X351) V8-5.0L SC   128
2012 Jaguar XJ (X351) V8-5.0L SC   129

Comments

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed

Driver carjacked at gunpoint after delivering food in Humboldt Park - FOX 32 Chicago

Driver carjacked at gunpoint after delivering food in Humboldt Park    FOX 32 Chicago

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra