Jaguar XF (X250) V8-5.0L SC A L L Diagnostic Trouble Codes ( DTC ): Diagnostic Trouble Code Descriptions

2010 Jaguar XF (X250) V8-5.0L SC

Page 1
A L L Diagnostic Trouble Codes ( DTC ): Diagnostic Trouble Code Descriptions
Anti-Lock Control - Stability Assist
DTC Index
Anti-Lock Control - Stability Assist
CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number
3548-1358-00
NOTE:
If the Hydraulic Control Unit (HCU) is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy
and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a
new HCU.
NOTE:
Generic scan tools may not read the codes listed, or may read only five digit codes. Match the five digits from the scan tool to the
first five digits of the seven digit code listed to identify the fault (the last two digits give additional information read by the
manufacturer-approved diagnostic system).
NOTE:
When performing voltage or resistance tests, always use a digital multimeter (DMM) accurate to three decimal places and with a
current calibration certificate. When testing resistance, always take the resistance of the DMM leads into account.
NOTE:
Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests.
NOTE:
If DTCs are recorded and, after performing the pinpoint tests, a fault is not present, an intermittent concern may be the cause.
Always check for loose connections and corroded terminals.