Jaguar XF (X250) V8-5.0L SC Technical Service Bulletin # JTB00232 Date: 110816
Cell Phone - Bluetooth(R) Connectivity
No: JTB00232
Issue: 1
Date: 16 AUG 2011
SECTION: 415
Bluetooth(R) Connectivity
AFFECTED VEHICLE RANGE:
XF (X250) VIN: R15005 -504718
Model Year: 2009 - 2011
XK (X150) VIN: B27897 - B42719
Model Year: 2008 - 2011
CONDITION SUMMARY:
Situation:
A previously-paired Bluetooth(R) telephone may fail to auto-connect to the vehicle on engine start up and also not manually connect for the duration
of that ignition cycle. This may be caused by the Bluetooth(R) telephone control module software.
NOTE:
The customer's telephone must be listed on the Jaguar Bluetooth(R) Compatibility website (Canada or USA) The software update listed below does
not affect the telephone compatibility and will only improve the telephone start-up sequence, ensuring a greater chance of auto-connectivity to the
vehicle.
41
Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to update the Bluetooth(R) telephone control module
software.
PARTS:
No parts necessary
TOOLS:
IDS with latest IDS-DVD and Calibration File; first available on IDS-DVD126_0.2 Calibration File 77 Jaguar-approved Midtronics Vehicle Power
Supply
WARRANTY
REPAIR PROCEDURE
UPDATE THE BLUETOOTH(R) TELEPHONE CONTROL MODULE SOFTWARE
CAUTION:
Ensure all ignition "ON"/ignition "OFF" requests are carried out; failure to perform these steps may cause damage to control modules in the vehicle.
CAUTION:
A Jaguar-approved Midtronics Vehicle Power Supply must be connected to the vehicle battery during IDS diagnosis / module programming.
1. Connect the Jaguar-approved Midtronics Vehicle Power Supply to the vehicle battery.
2. Turn ignition ON (engine not running).
NOTE:
IDS must be loaded with IDS-DVD126_0.2 or later and Calibration File 77 or later.
3. Connect the IDS to the vehicle and begin a new Symptom Driven Diagnostics (SDD) session.
4. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle.
5. From the Session Type selection screen, choose 'Diagnosis'.
6. Select the Selected Symptoms tab, and then select:
^ Electrical > Information and entertainment system > Telephone system
7. Select 'continue'.
8. Select the Recommendations tab.
9. From the Recommendations tab, select Run to configure the Cellular telephone control module (Bluetooth(R) telephone module).
^ Follow all on-screen instructions to complete this task.
42
10. Exit the current session.
11. Disconnect the IDS and the Midtronics Vehicle Power Supply from the vehicle.