Skip to main content

Jaguar XJ (X351) V8-5.0L SC Technical Service Bulletin # JTB00247 Date: 120329

Jaguar XJ (X351) V8-5.0L SC Technical Service Bulletin # JTB00247 Date: 120329



Brakes - Rear Brake Caliper Identification (Information Only)



JTB00247NAS1



29 MAR 2012



SECTION: 206



Rear Brake Caliper Identification



29



AFFECTED VEHICLE RANGE



CONDITION SUMMARY:



Situation:



For information only: to ensure correct replacement, the rear brake calipers are identified with a manufacturing code on the caliper.



Action:



In the event it becomes necessary to replace a rear brake caliper, refer to the Inspection Procedure below.



PARTS:



No parts necessary



TOOLS:



No special tools necessary



WARRANTY:



No Warranty information available



INSPECTION PROCEDURE



NOTE:



Please refer to EPC for the correct part numbers required for each vehicle variant.



NOTE:



EPC will display the superseded part numbers.



NOTE:



This bulletin is only for the rear brake calipers and for the vehicles between the specified VINs above.



1. Before ordering or replacing a rear brake caliper, carefully check the vehicle's current rear brake calipers for the presence of a manufacturing



code.



^ If the vehicle's rear brake calipers have no manufacturing code, both rear brake calipers must be replaced.



^ If the vehicle has only one rear brake caliper with a manufacturing code, only the rear brake caliper with no marking needs to be replaced.

Labels:

Comments

Post a Comment

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed
Post a Comment
Read more

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra
Post a Comment
Read more