J038NAS2,2010 Jaguar XK EMISSIONS RECALL: ENGINE MALFUNCTION INDICATOR LAMP ILLUMINATED SERVICE CAMPAIGN BULLETIN

EMISSIONS RECALL: ENGINE MALFUNCTION INDICATOR LAMP ILLUMINATED
SERVICE CAMPAIGN BULLETIN
Reference Number(s): J038NAS2, Date of Issue: November 10, 2014
CONDITION SUMMARY
Situation: An issue has been identified on a number of 2010-2012 model year XF (X250)
and XJ (X351) vehicles, and 2010-2014 model year XK (X150) vehicles fitted with the
5.0L V8 engine (naturally aspirated and supercharged) within the listed VIN ranges. The
condition may cause the engine Malfunction Indicator Lamp (MIL) to illuminate with
Diagnostic Trouble Code (DTC) P0316 in addition to one or more of the P0301-P0308 codes
stored in the Engine Control Module (ECM). This condition will have no effect on the
vehicle's performance, but may reduce the vehicle's ability to control tailpipe
emissions.
Action: Retailers are required to HOLD all affected vehicles that are within your
control and refrain from releasing the vehicles for new or used vehicle sale pending
completion of the rework action detailed in this Technical Bulletin. Unsold vehicles
should have this performed as part of the Pre-Delivery Inspection (PDI) process but
must have it completed prior to vehicle handover to the customer. Affected vehicles
already in the hands of customers should be updated at the next available opportunity.
PARTS
PART DESCRIPTION
JAGUAR: 2010-2012 XJ Range (X351), XF (X250); 2010-2014 XK Range (X150)
SECTION: 303-00
VIN: V00001-V39426, R47154-S61361, B32753-B54400
NOTE: an allowance of $0.50 US for the Authorized Modification Label has been
provided and should be claimed using code 'ZZZ001'.
NOTE: * when ordering parts, order only the expected percentage demand of parts
identified
NOTE: ** order quantity of '1-25' will ship as 1 (one) pack of 25 labels
NOTE: *** order quantity of '1' (one) is a pack of 25 certificates
DESCRIPTION
PART
No./SUNDRY
CODE
QTY./VALUE
EXPECTED % of
VEHICLES REQUIRING
PARTS*
Authorized Modification Label JLM21848 1** 100
CA Vehicle Emission Recall - Proof of
Correction Certificate (Californiaregistered
vehicles only)
JLM21849 1***
100 (Californiaregistered
vehicles
only)
2010 Jaguar XK
EMISSIONS RECALL: ENGINE MALFUNCTION INDICATOR LAMP ILLUMINATED SERVICE CAMPAIGN
BULLETIN
2019年6月17日 15:3 34:202 Page 1 © 2011 Mitchell Repair Information Company, LLC.
SPECIAL TOOLS
SDD with latest SDD-DVD and Calibration File; first available on DVD139.06 v. 189
Jaguar Land Rover-approved Midtronics Battery Power Supply
WARRANTY
Warranty claims must be submitted quoting Program Code 'J038' together with the
relevant Option Code from the table. The SRO and part information listed have been
included for information only. The Option Code(s) that allows for the drive in/drive
out allowance may only be claimed if the vehicle is brought into the workshop for this
action alone to be undertaken.
Warranty claims must be submitted for payment within 30 calendar days of completion of
the repair.
WARRANTY INFORMATION
An allowance of $0.50 (US) for the Authorized Modification Label has been provided and
should be claimed using code 'ZZZ001'
Normal Warranty policies and procedures apply
SERVICE INSTRUCTION
NOTE: This document is an 'Active Bulletin' that will display a functional
programming shortcut if accessed within a diagnostic session using SDD.
NOTE: Check DDW to ensure that a vehicle is affected by this program prior to
undertaking any rework action. Repair procedures are under constant
review, and therefore times/prices are subject to change; those quoted here
must be taken as guidance only. Refer to TOPIx to obtain the latest repair
time. At the time of confirming a booking for vehicle repair, ensure that all
outstanding Service Actions are identified to ensure the correct parts are
available and adequate workshop time is allocated for repairs to be
completed at one visit.
PROGRAM
CODE
OPTION
CODE
DESCRIPTION SRO
TIME
(HOURS)
PARTS/SUNDRY
CODE
QTY./VALUE
J038 B
Update Engine Control
Module software
86.99.13 0.30
-
ZZZ001
-
$0.50
J038 C
Update Engine Control
Module software
Drive in/drive out
86.99.13
10.10.10
0.30
0.10
-
ZZZ001
-
$0.50
-
CAUTION: XJ (X351 ONLY: to prevent service interval data corruption, it is
required that the Engine Control Module (ECM) fuse be removed before
configuring the Powertrain Control Module (PCM) as per the Service
2010 Jaguar XK
EMISSIONS RECALL: ENGINE MALFUNCTION INDICATOR LAMP ILLUMINATED SERVICE CAMPAIGN
BULLETIN
2019年6月17日 15:34:20 Page 2 © 2011 Mitchell Repair Information Company, LLC.
1. XJ (X351) engine compartment fuse box location.
Instruction below.
CAUTION: A Jaguar Land Rover-approved Midtronics battery power supply must
be connected to the vehicle battery during SDD diagnosis/module
programming.
CAUTION: Ensure all ignition 'ON'/ignition 'OFF' requests are carried out; failure to
perform these steps may cause damage to control modules in the
vehicle.
NOTE: SDD must be loaded with DVD139.06 v. 189 or later.
NOTE: XJ (X351) ONLY.
2010 Jaguar XK
EMISSIONS RECALL: ENGINE MALFUNCTION INDICATOR LAMP ILLUMINATED SERVICE CAMPAIGN
BULLETIN
2019年6月17日 15:34:20 Page 3 © 2011 Mitchell Repair Information Company, LLC.
2. Connect the Jaguar Land Rover-approved Midtronics battery power supply to the
vehicle battery.
CAUTION: XJ (X351) ONLY: when instructed to select the 'tick' to configure
the Powertrain Control Module (PCM), the Engine Control Module
(ECM) fuse must be removed prior to selecting the 'tick'. The fuse
box is located in the engine compartment (see Step 1). The ECM
fuse number is F3 - fuse rating 5A. When the software download is
complete and SDD states to set the ignition switch to
'OFF' (position 0), switch the ignition 'OFF' and then wait 10
seconds before installing the previously removed ECM fuse. Once
2010 Jaguar XK
EMISSIONS RECALL: ENGINE MALFUNCTION INDICATOR LAMP ILLUMINATED SERVICE CAMPAIGN
BULLETIN
2019年6月17日 15:34:20 Page 4 © 2011 Mitchell Repair Information Company, LLC.
3. Turn ignition 'ON' (engine not running).
4. Connect the Symptom Driven Diagnostics (SDD) system to the vehicle and begin a new
session.
5. Follow the on-screen prompts, allowing SDD to read the VIN and identify the
vehicle and initiating the data collect sequence.
6. Select 'Diagnosis' from the Session Type screen.
7. Select the 'Selected Symptoms' tab, and then select the following:
 Powertrain - Engine system - Engine performance
8. Read and close any publication from the list of recommended candidates to expose
the 'Extras' tab.
9. Select the 'Extras' tab.
10. From the Recommendations tab, select Run to perform the 'Configure existing module
- Powertrain control module' option.
 XJ (X351) ONLY: when the software download is complete and SDD states to set
the ignition switch to 'OFF' (position 0), switch the ignition 'OFF' and then
wait 10 seconds before installing the previously removed ECM fuse. Once the
fuse has been refitted, continue with the SDD command prompts.
11. Follow all on-screen instructions to complete this task.
12. Exit the current session.
13. Disconnect the SDD and the battery power supply from the vehicle.
14. Install a completed "Authorized Modification Label' to the radiator support panel.
15. California-registered vehicles only: hand customer completed 'CA Vehicle Emission
Recall - Proof of Correction Certificate' at vehicle handover.
the fuse has been refitted, continue with the SDD command
prompts.
NOTE: The Engine Control Module (ECM) may also be referred to as
Powertrain Control Module (PCM).
CAUTION: XJ (X351) ONLY: when instructed to select the 'tick' to configure
the Powertrain Control Module (PCM), the Engine Control Module
(ECM) fuse must be removed prior to selecting the 'tick'. The fuse
box is located in the engine compartment (see Step 1). The ECM
fuse number is F3 - fuse rating 5A. When the software download is
complete and SDD states to set the ignition switch to
'OFF' (position 0), switch the ignition 'OFF' and then wait 10
seconds before installing the previously removed ECM fuse. Once
the fuse has been refitted, continue with the SDD command
prompts.
2010 Jaguar XK
EMISSIONS RECALL: ENGINE MALFUNCTION INDICATOR LAMP ILLUMINATED SERVICE CAMPAIGN
BULLETIN
2019年6月17日 15:34:20 Page 5 © 2011 Mitchell Repair Information Company, LLC.

Diagnostic and Repair Information ,Wiring Diagrams. DTC. TSB. Types: TSB, DTC, Wiring Diagrams, OEM Procedures. Trusted by more than 400,000 technicians. OEM accurate fix for faster repairs. Repair Procedures and Labor Times. Factory Auto Repair info. Request A Demo Today. Factory-Correct Diagrams. Factory Part Numbers. Maintenance Schedules. Repair Procedures. Labor Times. Types: TSB, DTC.car insurance, auto insurance, auto, car, vehicle, insurance, quote, quotes, online, insurance，auto, autos, car, cars, vehicle, vehicles, used car, pre-owned car, pre-owned vehicle, used auto, used vehicle, rental，auto racing news, car racing news