Skip to main content

JTB00123,2010 Jaguar XK FRONT SHOCK ABSORBER SQUEAK - REPAIR PROCEDURE


FRONT SHOCK ABSORBER SQUEAK - REPAIR PROCEDURE
TECHNICAL SERVICE BULLETIN
Reference Number(s): JTB00123, Date of Issue: January 12, 2009
AFFECTED VEHICLE RANGE
XK (X150) with CATS only VIN: B10572 - Onwards
Model Year: 2007 - Onwards
CONDITION SUMMARY
Situation: An issue has been identified where a squeak noise from the front suspension
when driving over bumps may be evident. This noise may be due to the front shock
absorbers.
Action: In the event of a customer concern of the above, refer to the Repair Procedure
outlined below to replace the front shock absorbers.
PARTS
PARTS DESCRIPTION CHART
TOOLS
Refer to Workshop Manual (GTR) for required special tools
WARRANTY
DDW requires the use of causal part numbers. Labor only claims must show the causal
part number with a quantity of zero.
WARRANTY INFORMATIONS
JAGUAR: XK
Issue: 1
SECTION: 204
NOTE: Front shock absorbers must be replaced in pairs on a customer complaint
basis only.
C2P19129 Shock absorber - front Qty: 2
NOTE: Repair procedures are under constant review, and therefore times are
subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.
Description SRO
Time Condition Causal
2010 Jaguar XK
FRONT SHOCK ABSORBER SQUEAK - REPAIR PROCEDURE
2019年6月17日 15:3 38:0129 Page 1 © 2011 Mitchell Repair Information Company, LLC.
Normal warranty policy and procedures apply .
REPAIR PROCEDURE
DIAGNOSE FRONT SHOCK ABSORBER SQUEAK
1. Road test vehicle to confirm squeak noise is present.
2. Open hood.
3. Disconnect front shock absorber electrical connectors FL015 and FL025 .
4. Close hood.
5. Road test vehicle to confirm squeak noise is no longer present.
 If the squeak noise is no longer present, continue to REPLACE FRONT SHOCK
ABSORBERS below.
 If the squeak noise is still present, do not replace the front shock
absorbers; connect front shock absorber electrical connectors FL015 and FL025
and carry out further diagnosis as a separate Warranty claim.
REPLACE FRONT SHOCK ABSORBERS
1. Refer to Workshop Manual (GTR) section 204-01: Front Suspension to replace both
front shock absorbers.
(hours) Code Part
Front shock absorbers - Diagnosis and
Replacement
60.91.47 1.20 42 C2P19129
NOTE: Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home > NAS > X150 - XK > Electrical Guides > Model Year >
Electrical Guides.
NOTE: Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home > NAS > X150 - XK > Service Information > Model Year > 2:
Chassis > 204: Suspension > 204-01: Front Suspension.
2010 Jaguar XK
FRONT SHOCK ABSORBER SQUEAK - REPAIR PROCEDURE
2019年6月17日 15:38:09 Page 2 © 2011 Mitchell Repair Information Company, LLC.
Diagnostic and Repair Information ,Wiring Diagrams. DTC. TSB. Types: TSB, DTC, Wiring Diagrams, OEM Procedures. Trusted by more than 400,000 technicians. OEM accurate fix for faster repairs. Repair Procedures and Labor Times. Factory Auto Repair info. Request A Demo Today. Factory-Correct Diagrams. Factory Part Numbers. Maintenance Schedules. Repair Procedures. Labor Times. Types: TSB, DTC.car insurance, auto insurance, auto, car, vehicle, insurance, quote, quotes, online, insurance，auto, autos, car, cars, vehicle, vehicles, used car, pre-owned car, pre-owned vehicle, used auto, used vehicle, rental，auto racing news, car racing news
Labels:

Comments

Post a Comment

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed
Post a Comment
Read more

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra
Post a Comment
Read more