Skip to main content

Jaguar S-Type (X200) V6-3.0L Technical Service Bulletin # 6-73 Date: 990701

Jaguar S-Type (X200) V6-3.0L Technical Service Bulletin # 6-73 Date: 990701



JTIS - CD ROM Shop Manual Issue 7



6-73



DATE



7/99



All



MODEL



All



VIN



2000 Jaguar S-Type (X200) V6-3.0L Page 11



Jaguar Technical Information System (JTIS) - Issue 7 - Workshop Manual - CD-ROM



ISSUE:



Workshop manual information for 2000 MY S-TYPE, 1995-99 MY Sedan Range and 1997-99 XK8 has been released on CD-ROM (Part No. JJM



10 30 99/95) for use with the multimedia training PC.



ACTION:



Ensure that the software is installed from the lower CD-ROM drive (E: drive).



Refer to the inside cover of the CD-ROM jewel case for installation instructions.



Once this CD-ROM has been installed, the system will not accept the JTIS Issue 6 CD-ROM.



Note:



Store this CD-ROM in a secure place. Do not lose or misplace the JTIS CD-ROM as it will not be replaced free of charge unless it is defective.



The price reflects the fact that JTIS Issue 7 is no longer a pilot CD. Additional CD-ROMs must be ordered through the zone parts department as



a special order.



JJM 103099/95 US $1350.00

Labels:

Comments

Post a Comment

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed
Post a Comment
Read more

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra
Post a Comment
Read more