Skip to main content

Jaguar S-Type #JTB00056 Date: 070824 A/T - Fluid Leakage Page 265 NUMBER: JTB00056

Jaguar S-Type #JTB00056 Date: 070824
A/T - Fluid Leakage
  Page 265
NUMBER: JTB00056
DATE: 24 AUG 2007
MODEL:
XJ
XK
S-TYPE
SECTION: 307-01
Automatic Transmission Weeps Oil
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
OIL WEEPS PAST THE TRANSMISSION OUTPUT SEAL
Situation:
On some of the above model vehicles in the VIN ranges and model years listed a customer may have a concern of a fluid leak from the transmission.
This leak may be due to a possible oil leak path past the transmission output shaft seal
Action:
In the case of a confirmed customer complaint dealers are to install a new output flange, seal, and lock nut by following the repair below.
PARTS
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
INSTALL NEW EXTENSION HOUSING FLANGE AND SEAL
1. Install a new extension housing seal and flange (see Global Technical Reference GTR Workshop Manual, section 307-01 (44.20.18)).
  Page 266
Disclaimer
Labels:
Location: 14625 50th Rd, Parsons, KS 67357, USA

Comments

Post a Comment

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed
Post a Comment
Read more

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra
Post a Comment
Read more