Skip to main content

Jaguar S-Type #JTB00092 Date: 080314 Steering - Revised Steering Gear Removal/Installation NUMBER: JTB00092

 Jaguar S-Type #JTB00092 Date: 080314
Steering - Revised Steering Gear Removal/Installation
NUMBER: JTB00092
(Issue 1)
MODEL: S-TYPE, X-TYPE, XJ
DATE: 14 MMM 2008
SECTION: 211
Revised Workshop Procedure - Remove/Install Steering Gear
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
Situation:
A new workshop procedure has been developed for the removal and installation of the steering gear. It is no longer necessary to remove the road
wheels or track rod ends.
Action:
In the event you should have to remove / install the steering gear, follow the Repair
Procedure outlined below.
PARTS:
No parts required
TOOLS:
No special tools required
  Page 267
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE:
REMOVAL AND INSTALLATION: STEERING GEAR
NOTE:
GLOBAL TECHNICAL REFERENCE (GTR) LOOKUP SEQUENCE IS AS FOLLOWS:
GTR HOME> NAS > MODEL> CHASSIS > WORKSHOP MANUAL> 211: STEERING SYSTEM> 211-02: POWER STEERING
1. Refer to Workshop Manual (GTR) section 211-02: Power Steering, for the revised removal/installation instructions.
Disclaimer
Labels:
Location: 2000-2706 Fitchburg Rd, Ravenna, KY 40472, USA

Comments

Post a Comment

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed
Post a Comment
Read more

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra
Post a Comment
Read more