Jaguar S-Type #JTB001142 Date: 090630 Interior - Back Glass Blind Component Availability Page 309 NUMBER JTB00114
Jaguar S-Type #JTB001142 Date: 090630
Interior - Back Glass Blind Component Availability
Page 309
NUMBER JTB00114
(ISSUE 2)
MODEL S-TYPE, XJ
DATE 30 JUNE 2009
ISSUE '2' CHANGES ARE HIGHLIGHTED WITH GRAY BACKGROUND
SECTION: 501
Rear Windshield Blind Motor / Arm Mechanism - Lower Level Service Part Availability
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
Situation:
The rear windshield blind motor and arm mechanism are now available as separate serviceable parts. In the event of one of the following conditions,
replacement of the complete rear windshield blind assembly is no longer necessary:
^ Rear windshield blind motor failure
^ Rear windshield blind arm mechanism failure
Action:
In the event of a customer concern of one of the above conditions, follow the Repair Procedure outlined below to replace the rear windshield blind
motor or arm mechanism.
PARTS
TOOLS:
Refer to Workshop Manual (GTR) for any special tools (if required)
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE:
REPLACE REAR WINDSHIELD BLIND MOTORS
Page 310
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > Model > Service Information > Model Year > Workshop
Manual > 5: Body and Paint > 501: Body and Paint > 501-05: Interior Trim and Ornamentation
1. Refer to Workshop Manual (GTR) Section 501-05: Interior Trim and Ornamentation to replace the affected rear windshield blind motors.
REPLACE REAR WINDSHIELD BLIND ARM MECHANISM
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > Model > Service Information > Model Year > Workshop
Manual > 5: Body and Paint > 501: Body and Paint > 501-05: Interior Trim and Ornamentation
1. Refer to Workshop Manual (GTR) Section 501-05: Interior Trim and Ornamentation to replace the affected rear windshield blind arm mechanism.
Interior - Back Glass Blind Component Availability
Page 309
NUMBER JTB00114
(ISSUE 2)
MODEL S-TYPE, XJ
DATE 30 JUNE 2009
ISSUE '2' CHANGES ARE HIGHLIGHTED WITH GRAY BACKGROUND
SECTION: 501
Rear Windshield Blind Motor / Arm Mechanism - Lower Level Service Part Availability
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
Situation:
The rear windshield blind motor and arm mechanism are now available as separate serviceable parts. In the event of one of the following conditions,
replacement of the complete rear windshield blind assembly is no longer necessary:
^ Rear windshield blind motor failure
^ Rear windshield blind arm mechanism failure
Action:
In the event of a customer concern of one of the above conditions, follow the Repair Procedure outlined below to replace the rear windshield blind
motor or arm mechanism.
PARTS
TOOLS:
Refer to Workshop Manual (GTR) for any special tools (if required)
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE:
REPLACE REAR WINDSHIELD BLIND MOTORS
Page 310
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > Model > Service Information > Model Year > Workshop
Manual > 5: Body and Paint > 501: Body and Paint > 501-05: Interior Trim and Ornamentation
1. Refer to Workshop Manual (GTR) Section 501-05: Interior Trim and Ornamentation to replace the affected rear windshield blind motors.
REPLACE REAR WINDSHIELD BLIND ARM MECHANISM
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > Model > Service Information > Model Year > Workshop
Manual > 5: Body and Paint > 501: Body and Paint > 501-05: Interior Trim and Ornamentation
1. Refer to Workshop Manual (GTR) Section 501-05: Interior Trim and Ornamentation to replace the affected rear windshield blind arm mechanism.
Comments
Post a Comment