Jaguar S-Type #JTB00135 Date: 081125 A/T - Revised Gear Selector Lever Service Procedure NUMBER: JTB00135
Jaguar S-Type #JTB00135 Date: 081125
A/T - Revised Gear Selector Lever Service Procedure
NUMBER: JTB00135
(ISSUE 1)
Page 298
MODEL: S-TYPE
DATE: 25 NOV 2008
SECTION: 307
New Workshop Procedure - Remove / Install Automatic Transmission Selector Lever
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
Situation:
The Workshop Manual procedure to remove / install the automatic transmission selector lever has been revised. The new procedure no longer
requires removal of the Electronic Park Brake switch.
Action:
In the event it becomes necessary to remove / install the automatic transmission selector lever, refer to the Repair Procedure outlined below.
PARTS:
No parts necessary
TOOLS:
Refer to the Workshop Manual (GTR) for any required special tools
WARRANTY
REPAIR PROCEDURE
REMOVE / INSTALL AUTOMATIC TRANSMISSION SELECTOR LEVER
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > X200-S-TYPE > Service Information > Model
Year > Workshop Manual > 3: Powertrain > 307: Automatic Transmission / Transaxle > 307-05: Automatic Transmission / Transaxle
External Controls
1. Refer to Workshop Manual (GTR) Section 307-05: Automatic Transmission / Transaxle External Controls to remove / install the transmission
selector lever assembly.
Disclaimer
A/T - Revised Gear Selector Lever Service Procedure
NUMBER: JTB00135
(ISSUE 1)
Page 298
MODEL: S-TYPE
DATE: 25 NOV 2008
SECTION: 307
New Workshop Procedure - Remove / Install Automatic Transmission Selector Lever
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
Situation:
The Workshop Manual procedure to remove / install the automatic transmission selector lever has been revised. The new procedure no longer
requires removal of the Electronic Park Brake switch.
Action:
In the event it becomes necessary to remove / install the automatic transmission selector lever, refer to the Repair Procedure outlined below.
PARTS:
No parts necessary
TOOLS:
Refer to the Workshop Manual (GTR) for any required special tools
WARRANTY
REPAIR PROCEDURE
REMOVE / INSTALL AUTOMATIC TRANSMISSION SELECTOR LEVER
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > X200-S-TYPE > Service Information > Model
Year > Workshop Manual > 3: Powertrain > 307: Automatic Transmission / Transaxle > 307-05: Automatic Transmission / Transaxle
External Controls
1. Refer to Workshop Manual (GTR) Section 307-05: Automatic Transmission / Transaxle External Controls to remove / install the transmission
selector lever assembly.
Disclaimer
Comments
Post a Comment