Skip to main content

Jaguar S-Type #JTB000712 Date: 090213 A/T Controls - Harsh Shifting Concerns Page 299 NUMBER MODEL S-TYPE, XJ, XK

Jaguar S-Type #JTB000712 Date: 090213
A/T Controls - Harsh Shifting Concerns
  Page 299
NUMBER
MODEL S-TYPE, XJ, XK
DATE
ISSUE '2' CHANGES ARE HIGHLIGHTED WITH GRAY BACKGROUND.
SECTION: 307
Harsh Transmission Shifts Repair Procedure
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
Situation:
The customer may complain of harsh transmission shifting. The adaptive shift strategy can drift over time causing higher than normal clutch
pressures.
NOTE:
The customer should be informed that after the adaption clearing procedure and re-configuration repair the transmission shift quality will improve
over time as the transmission adapts to the customer's driving requirements.
Action:
Should a customer express the above concern, clear the adaptions, reconfigure the TCM, and reset the adaptions by following the Repair Procedure
below.
PARTS:
No parts necessary; information only
TOOLS
  Page 300
WARRANTY
REPAIR PROCEDURE
  Page 301
PERFORM TRANSMISSION ADAPTIONS DRIVE CYCLE
Labels:
Location: 3248 110th St, Waucoma, IA 52171, USA

Comments

Post a Comment

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed
Post a Comment
Read more

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra
Post a Comment
Read more