Jaguar S-Type #JTB000722 Date: 090216 A/T Controls - MIL ON/DTC's P0780/P0785/P0829 Set NUMBER MODEL S-TYPE, XJ, XK
Jaguar S-Type #JTB000722 Date: 090216
A/T Controls - MIL ON/DTC's P0780/P0785/P0829 Set
NUMBER
MODEL S-TYPE, XJ, XK
DATE
ISSUE '2' CHANGES ARE HIGHLIGHTED WITH GRAY BACKGROUND
SECTION: 307
Transmission MIL Illuminated with DTCs P0780 - P0785, P0829 Stored Repair Procedure
AFFECTED VEHICLE RANGE
Page 302
CONDITION SUMMARY
Situation/Action
PARTS:
No parts necessary; information only
TOOLS
WARRANTY
REPAIR PROCEDURE
RECONFIGURE TRANSMISSION CONTROL MODULE
CAUTION:
A Midtronics PSC-550 Vehicle Power Supply must be connected to the vehicle battery during diagnosis / module programming.
1. Connect the Midtronics PSC-550 Vehicle Power Supply to the vehicle battery.
NOTE:
IDS must be loaded with software release DVD109 Patch File 6 or later.
2. Connect the IDS to the vehicle and begin a new diagnostic session by entering the correct VIN for the current vehicle.
3. Follow the IDS prompts to read the vehicle configuration.
4. Select 'No' when prompted 'Do you wish to read diagnostic trouble codes?'
5. Select 'tick' to continue.
6. Select the 'Vehicle Configuration' tab when Content Model is displayed.
7. From the Vehicle Configuration menu, configure the 'Transmission control module' by selecting from the dropdown menu:
^ 'Module programming' > 'Configure existing module' > 'Transmission control module'
8. Select 'tick' to continue, following all on-screen instructions to complete this task.
^ IDS will return to the Vehicle Configuration menu when completed.
Page 303
9. Exit the current session.
10. Disconnect IDS and the Midtronics PSC-550 Vehicle Power Supply from the vehicle.
A/T Controls - MIL ON/DTC's P0780/P0785/P0829 Set
NUMBER
MODEL S-TYPE, XJ, XK
DATE
ISSUE '2' CHANGES ARE HIGHLIGHTED WITH GRAY BACKGROUND
SECTION: 307
Transmission MIL Illuminated with DTCs P0780 - P0785, P0829 Stored Repair Procedure
AFFECTED VEHICLE RANGE
Page 302
CONDITION SUMMARY
Situation/Action
PARTS:
No parts necessary; information only
TOOLS
WARRANTY
REPAIR PROCEDURE
RECONFIGURE TRANSMISSION CONTROL MODULE
CAUTION:
A Midtronics PSC-550 Vehicle Power Supply must be connected to the vehicle battery during diagnosis / module programming.
1. Connect the Midtronics PSC-550 Vehicle Power Supply to the vehicle battery.
NOTE:
IDS must be loaded with software release DVD109 Patch File 6 or later.
2. Connect the IDS to the vehicle and begin a new diagnostic session by entering the correct VIN for the current vehicle.
3. Follow the IDS prompts to read the vehicle configuration.
4. Select 'No' when prompted 'Do you wish to read diagnostic trouble codes?'
5. Select 'tick' to continue.
6. Select the 'Vehicle Configuration' tab when Content Model is displayed.
7. From the Vehicle Configuration menu, configure the 'Transmission control module' by selecting from the dropdown menu:
^ 'Module programming' > 'Configure existing module' > 'Transmission control module'
8. Select 'tick' to continue, following all on-screen instructions to complete this task.
^ IDS will return to the Vehicle Configuration menu when completed.
Page 303
9. Exit the current session.
10. Disconnect IDS and the Midtronics PSC-550 Vehicle Power Supply from the vehicle.
Comments
Post a Comment