Skip to main content

Jaguar XJ (X351) V8-5.0L SC Technical Service Bulletin # K099 Date: 120420

Jaguar XJ (X351) V8-5.0L SC Technical Service Bulletin # K099 Date: 120420



Campaign K099 - Battery Monitoring System Replacement



K099NAS1



20 APR 2012



THIS SERVICE ACTION IS VALID FOR A LIMITED TIME ONLY AND WILL EXPIRE ON 31 MARCH 2014



SECTION: 414



Service Action: Battery Monitoring System Replacement



AFFECTED VEHICLE RANGE:



XJ (X351) VIN: V00339 - V20566



Model Year: 2010 - 2012



CONDITION SUMMARY:



Situation:



A concern has been identified on a limited number of 2010 - 2012 model year XJ vehicles within the VIN range above with the Battery Monitoring



System (BMS) where a flat battery / no-start condition occurs due to loss of Ah capacity.



Action:



Retailers are required to 'HOLD' all affected vehicles within their control and refrain from releasing the vehicles for onward distribution and sale



pending completion of the rework actions detailed in this bulletin. Affected vehicles in the hands of owners should be repaired at the next available



opportunity. At the time of customer appointment, ensure that all outstanding service campaigns for each individual vehicle are identified and



allocate sufficient time and resources to complete all campaigns. Refer to the Repair Procedure outlined below.



PARTS



TOOLS:



Refer to Workshop Manual for any required special tools

Labels:

Comments

Post a Comment

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed
Post a Comment
Read more

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra
Post a Comment
Read more