Skip to main content

Jaguar S-Type (X200) V6-3.0L Technical Service Bulletin # S501-29 Date: 050801

Jaguar S-Type (X200) V6-3.0L Technical Service Bulletin # S501-29 Date: 050801



Instruments - Incorrect Compass Readings



S501-29



S-TYPE



DATE:



08/05



MODEL



2000 MY-ON



S-TYPE



VIN:



L00001-ON



Interior Mirror Compass - Compass Reading Incorrectly - Reroute Wiring



Issue:



Some S-TYPE vehicles equipped with the interior mirror compass may exhibit a condition where the compass is functioning but reading incorrectly.



Cause:



Interference from nearby wiring.



2000 Jaguar S-Type (X200) V6-3.0L Page 113



Action:



In case of a customer complaint of incorrect compass indication, reroute the interior mirror wiring as outlined below.



1. Remove the auto-dimming interior mirror (see Global Technical Reference GTR Workshop Manual, section 501-09).



Note:



No wires should cross over the compass circuit board. Each set of wires should be routed as a twisted pair for maximum effect.



2. Reroute the wires around the edge of the plastic casing.



3. Install the auto-dimming interior mirror (see Global Technical Reference GTR Workshop Manual, section 501-09).



Global Technical Reference (GTR) Workshop Manual Information:



Internet access: http://www.jaguartechinfo.com



Warranty Information:



Warranty claims should be submitted quoting the information found in the table.



This will result in payment of the stated time and, where applicable parts/miscellaneous expense codes as listed.



Note:



Repair procedures are under constant review, and therefore repair times are subject to change. The times quoted here must be taken as guidance



only. Always refer to DDW to obtain the latest repair time.

Labels:

Comments

Post a Comment

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed
Post a Comment
Read more

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra
Post a Comment
Read more