Skip to main content

Jaguar S-Type (X200) V6-3.0L Technical Service Bulletin # S307-06 Date: 020501

Jaguar S-Type (X200) V6-3.0L Technical Service Bulletin # S307-06 Date: 020501



A/T - Difficult Range Selection/No Start Condition



S307-06



DATE



05/02



S-TYPE



MODEL



2000-02 MY



S-TYPE



VIN



L00001-M45255



Difficulty Selecting Range - Stiff Or Restricted Movement - Revised Selector Lever Cable



Issue:



Some owners of 2000-02 MY S-TYPE vehicles may experience difficult range selection, or an inability to start the vehicle.



These conditions can be caused by the following:



^ The inner transmission selector lever cable movement is restricted/stiff.



^ The outer transmission selector lever cable appears to be moving within the crimped ends.



An improved selector lever cable entered production on later vehicles to solve this condition.



Action:



In case of a customer complaint of the above conditions on a 2000-2002 MY S-TYPE vehicle, install the new improved selector lever cable, available under the existing part number (XRB 33366).

Labels:

Comments

Post a Comment

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed
Post a Comment
Read more

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra
Post a Comment
Read more