Skip to main content

Jaguar XF (X250) V8-5.0L SC Technical Service Bulletin # NHTSA12V521000 Date: 121026

Jaguar XF (X250) V8-5.0L SC Technical Service Bulletin # NHTSA12V521000 Date: 121026



Recall 12V521000: Fuel Tank Outlet Flange Replacement



VEHICLE MAKE/MODEL: MODEL YEAR(S):





Jaguar/XF 2010-2012



MANUFACTURER: Jaguar Land Rover North America, LLC.



REPORT RECEIPT DATE: October 26, 2012



NHTSA CAMPAIGN ID NUMBER: 12V521000



NHTSA Action Number: N/A



COMPONENT: Fuel System, Gasoline



POTENTIAL NUMBER OF UNITS AFFECTED: 4,195



SUMMARY:



Jaguar is recalling certain model year 2010-2012 XF vehicles equipped with a 5.0L gasoline engine. The affected vehicles may have a fuel tank fuel



outlet flange that may crack.



CONSEQUENCE:



The cracked flange may result in fuel leakage onto the ground. This leaking fuel, in the presence of an ignition source, may result in a vehicle fire.



REMEDY:



Jaguar will notify owners, and dealers will replace the affected fuel tank fuel outlet flanges, free of charge. The recall is expected to begin on, or



before, December 7, 2012. Owners may contact Jaguar at 1-800-452-4827.



NOTES:



Jaguar's campaign recall number is J027. Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at

Labels:

Comments

Post a Comment

Popular posts from this blog

Integrated Control Panel (FCDIM)

Integrated Control Panel (FCDIM) Diagnostic Trouble Code (DTC) Index Integrated Control Panel (FCDIM) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. 2012 Jaguar XJ (X351) V8-5.0L SC   284 NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed
Post a Comment
Read more

Adaptive Damping Module (SUMB)

Adaptive Damping Module (SUMB) Diagnostic Trouble Code (DTC) Index Adaptive Damping Module (SUMB) CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault and may also cause additional faults in the vehicle being checked and/or the donor vehicle. CAUTION: When probing connectors to take measurements in the course of the pinpoint tests, use the adaptor kit, part number 3548-1358-00. NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval programme is in operation, prior to the installation of a new module/component. NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra
Post a Comment
Read more